Street Motorcycle

Ducati 998 2002 Review

Unbelievably, the 916 has been around since 1994. Thats way back in the time when Yamahas FZR1000 was still the big dog in the show rooms.
When released, the 916 didnt revolutionize the sport bike sector, Honda had already done that with their Fireblade. What it did, however, is put that new definition of performance into perhaps the prettiest package of the decade. The 916 is still with us and it looks much the same as it did back in 94. Most people generally agree that, almost ten years later, it looks up-to-date. The Ducati has enjoyed gradual updates year by year, and is still arguably at the top of its class.
Now that the history lessons over, whats it like to ride? In a word, brilliant!
Yes, thats it - BRILLIANT!
At this point I could save this file and end my report - anything said from now on is simply a variation of brilliant. But, OK, you probably havent ridden the bike so Ill be sensible and run through this test from start to finish, starting with the engine.
This year, the entire 916 - sorry, its now the 998 range - benefits from the new Testastretta, or narrow head engine. This is the motor Troy Bayliss used to win the World Superbike title this year. It comes in three states of tune: 123 bhp for the 998, 136 for the 998S and a claimed 139 bhp for the limited edition customer racer, the 998R. The engine actually displaces 998ccs - hence the name!
The Ducati 916 range has enjoyed gradual updates year by year, and is still arguably at the top of its class.On the track, its immediately apparent that in its latest guise, the engine is much more responsive low down than in previous incarnations. The standard 998 is still a little short of puff on top, a GSX-R1000 would laugh at its straight-line performance, but the stronger 139bhp 998R might silence the Suzukis chuckles. Torrents of torque make the bike very easy to ride. Even if you ham up the gears and exit a corner too far up the six-speed box, the bike will rescue you, pulling strongly from as low as 2,000rpm. Itll pull from below that, but the power pulses from the two 500cc pistons swinging up and down in the 90-degree V create too much snatch in the drive train for anyone with mechanical sensitivities to try it for long.
The powers build-up is linear and theres no sudden power band to catch you out, but there is enough low-down grunt to break the rear tires traction in the damp or cold conditions that were prevalent during my track test at Silverstone. Early in the morning, when damp patches still littered many of the corners, I lit up the rear tire, sliding it full sideways as I exited a tight turn. It was a progressive slide and the bike kept itself in order as I rolled off the throttle gently. Thankfully, the rear hooked up again without drama when I got back on the power. There wasnt even a hint of high side.

The new 998 is far quieter than the original 916; the engine, gear box, clutch and exhaust -- they all produce less clatter and bellow this year. A refined Ducati? Hmmmmm.
  The relative lack of top end punch, and the fact that I had recently ridden a four-cylinder race bike with a cut-out set at something above 15,000rpm, meant I was hitting the rather severe rev limiter all too much. It cuts the engine so efficiently that the faster riders on the track started to use it as an impromptu quick-shifter! The gear box is smooth and precise and the clutch light and accurate. The bite point stayed in exactly the same place for the entire session. The engine seems much refined over early models, its far quieter than the original 916; the engine, gear box, clutch and exhaust - they all produce less clatter and bellow this year. A refined Ducati? Hmmm.

A powerful engine is all very well, but it needs a capable chassis to help get the power promised by that glorious V-Twin onto the ground and to keep it there. This is an area that the 916 series has always excelled in and this year is no different. While the standard 998 isnt as exotically equipped as its 998R stablemate, its nonetheless plenty well equipped to cope with the 123 bhp on tap. The Brembo brakes are also a notch down from the trick race parts fitted to the R, but again, the bike stops without drama and without a great deal of effort at the lever.
Entering the turns at the end of both the fast front and back straights at Silverstone gave them a good test, which they passed with flying colors by providing consistent and dependable braking time and time again. There was no fade, no excess lever travel, no hint of sponginess - just plenty of progressive two-fingered braking power all day. Compare that to the disappointing feel of the early 916 brakes, and theres even more evidence that the 916 is evolving well.

While the standard 998 isnt as exotically equipped as its 998R stablemate, its nonetheless plenty well equipped to cope with the 123 bhp on tap.  Suspension duties on the 998 are taken care of by a pair of Showa front forks, which are Titanium Nitride treated even on the standard 998. Ti Nitride is a super-slick coating that ensures the fork tubes dont stick to the sliders under heavy use. The rear end is well-controlled by an excellent Ohlins shock. The front brake discs are thinner this year, lowering the weight hanging on the front wheel and thus making turn-in even quicker. Indeed, the little 998 (for it is a physically tiny motorcycle) turns in fast and holds a line with amazing tenacity. Not even the bumps and tarmac ridges at Silverstone could shake the bike, even on full throttle while laid over on the tires edges.